Selling My Used Spinning Wheels

Selling My Used Spinning Wheels

I have decided to sell a few of my spinning wheels. I don’t use these three very much and gathering dust is not what they were meant for.

Update: The Ashford Country Spinner 2 is the last lightly used spinning wheel that I have for sale. All the other used spinning wheels have been sold. The second hand Ashford Country Spinner is boxed and ready to ship to you.

  1. REDUCED PRICE and boxed for shipping. Ashford Country Spinner 2 for sale. Barely used. 1 bobbin. Assembled and nicely finished with wood butters and light wax. Boxed up and ready for shipping from 49446 at buyers expense. Wheel is still assembled. Bobbin was the only piece dissasembeled which uses just 4 screws. Instructions included and in the box for the wheel and the bobbin both. Reduced to $550 down from $650.
Ashford Country Spinner 2

2. SOLD – Majacraft Little Gem Spinning Wheel package with Extras – SOLD

-Double Treadle
-Seven (7) bobbins
-Quick change flyer
-Ratios: 4.5:1, 6:1, 8.5:1, 10.5:1, 12.75:1
-Weight: 10 lbs.
-Wheel diameter; 8.25″
-Orifice height is adjustable 26″ – 28″
-Delta Orifice
-Sealed bearings (no oiling required)
-Sliding flyer hook, both regular and jumbo
-Sensitive scotch tension
-Custom Designed Shoulder Bag in Silver
-1 extra bottom drive band
-2 extra top drive bands
-All the instructions and papers
-Spins like a full-sized wheel with an easy rolling treadle action
-Separates into 2 parts, packs into its bag and fits in a suitcase or overhead bin locker while flying
-Compatible bobbins and flyers with Majacraft wheels and accessories
-Brand New Never Used High Speed Whorl on the Gem: 10.1:1, 12:1, 14.5:1, & 19.5:1
-My Ashford upright lazy kate, which works with both this bobbin size and the bulky/jumbo.

My Little Gem and upright lazy kate were bought in Scotland back in 2005. It is 1 of the first 2 wheels I ever bought at my first ever fiber festival. It is a Little Gem 1 which has had the Majacraft upgrade installed by a Majacraft dealer who also repairs spinning wheels. Changing the bottom drive band, is now done the same way as a Little Gem 2. So I think of my Little Gem as a 1.5. It has a lovely wood with beautiful wood grain. The flywheel is the original and is one of the prettiest woods that they used in the past. It is not warped and has no cracks.

Retails at $1200 and $270 for all the extras. At nearly 45% off Retail, it is all For Sale at $800. Will ship anywhere in USA for an additional $50.00. Outside USA, buyer pays shipping. Otherwise local pick up.

Heavenly Handspinner Spinning Wheel

3. SOLD and picked up.

Heavenly Hand Spinning Wheel with Custom Design. (Tree of Life Commission) Customized and Finished with extras.

Wheel comes standard with a spring clip weighted flyer, set of 3 super D Dooper bobbins, orifice hook and drive bland.

Extras: spare drive band, spare leather tension strap, 5 extra spring clips to allow for 3 per side of flyer if you wish to lace the flyer for finer spinning, and 3 extra super D Dooper Bobbins.

Bobbins

Three of the Bobbins and the laser cuts on the wheel I finished with chalk paint and sealed with dark wax. The rest of the wood was sealed with Dark wax to protect the wood and bring out the grain. I provided the design that was laser cut into the fly wheel on both sides. The 3 larger symbols in the center of the wheel laser cut into both sides of the wheel are Fortitude, Gratitude and Inner Peace. the symbol that repeats at the edge on both sides of the fly wheel is Passion. These symbols are the Zibu Angelic Symbols for healing.

Three of the bobbins are still left unfinished for you to choose your color and design. NOTE one bobbin slipped off and fell to the floor. It put a small crack in the end bit that was repaired by my husband. I provided a close up of the bobbin so you can see it is barely noticeable.

Repaired Bobbin

Single drive – Irish tension
Beautiful hand crafted spinning wheel, with hand-selected Red Oak, Maple and Walnut (in the flyer).
Double Treadle
Precision ball bearing wheel for ease of use and maintenance.
Bobbins that hold approximately 6ozs
Ratios of 6:1, 9:1 and 13:1
Each bobbin has a nylon 66 impregnated bearing – for no wear on the flyer shaft.
Spring clip on the flyer – for ease of even yarn distribution on the bobbin.
Weighs less than 13.6 pounds.
Orifice height is 24 inches and the diameter is 9/16ths of an inch.
Height is 28 & 1/2 x 16 & 1/2 x 14 inches

Price is $450.00 reduced down from $650.00 and FREE USA shipping to lower 48 states. I have it boxed in the original box and packaging with even extra padding that it came with.

Heavenly Handspinner Spinning Wheel
What is my favorite wheel to spin yarn?

What is my favorite wheel to spin yarn?

What is my favorite wheel for spinning yarn? Does it have to be one? It really does vary depending on what weight of yarn I want to spin, where I want to spin, and what will be happening around me.

Goddess ready to spin fluff and fiber

I was asked recently what wheel was my favorite so far after embarking on a major test driving of many different wheels with various types of tension systems. I replied this:

It really depends WHAT I am spinning, WHY, and WHERE.

Art yarn production….hands down Ashford JUMBO E spinner.

Ashford JUMBO E Spinner

Demo out in public for a festival where I am spinning locks for a long time, stopping and starting a lot…..Ashford Country Spinner 1. CS1.

Ashford Country Spinner 1 at a demo festival

Putzy for fun on my own or a spin circle locally for an hour or 2…bulky to thin….a vintage Louet.

Vintage Louet S70

Putzy but feeling funky and weird…spinning for an hour or 2….Moswolt M1. Medium to Bulky.

Moswolt M1

Hanging at home and spinning super fine…I prefer a supported spindle.

Goddess, nostepin, and companion

So what weight of yarn, where you want to spin, as in carry or move it far, all that does matter.

The single most common thing of all these wheels is that they are all simple tension and 1 or 2 speeds. Bobbin led or Irish tension for all of them.

Lockspinning on a Ashford CS1

If you want to spin most all weights of yarn but probably won’t do production yarn spinning, still want a portable wheel and don’t require bobbins to hold 2-3 pds of fiber at once….. You will need a versatile wheel.

If you do want to spin both fine and bulky capabilities…. I think I would suggest a Louet. If you are like me and prefer antiques or traditional looking wheels, try hunting for an older style. Maybe you would like a Louet S70 as much as I do.

Vintage Louet S70

A Louet is the most versatile out of the box with no extras wheel. Simple tensioning, uncomplicated wheels, accessories to spin fine or bulky if you want more past their regular accessories, and still portable and sturdy.

Most important….a Louet will NOT break the bank while you are learning and are easy enough to even pick up second hand. Parts are easy to get and not very many working parts to break to start with.

I am not a distributor for any dealer, so my suggestions are based on spinning a lot of wheels and seeing many comments of other people about their wheels and frustrations they have while spinning.

All of those wheels, I just sit down and spin without much fuss. Just how I like it.